Packages¶
Introduction¶
First, we need to define some global configuration elements, such as internal opcodes values and so on.
This is done in the packages !
Common¶
common¶
common.vhd
common package
Enums¶
Enum list 3 elements
instructions 48 values
! @brief Type listings to define the decoder outputs, per opcodes.
• i_NOP
Value : 0
• i_LUI
Value : 1
• i_AUIPC
Value : 2
• i_ADDI
Value : 3
• i_SLTI
Value : 4
• i_SLTIU
Value : 5
• i_XORI
Value : 6
• i_ANDI
Value : 7
• i_SLLI
Value : 8
• i_SRLI
Value : 9
• i_SRAI
Value : 10
• i_ORI
Value : 11
• i_ADD
Value : 12
• i_SUB
Value : 13
• i_SLL
Value : 14
• i_SLT
Value : 15
• i_SLTU
Value : 16
• i_XOR
Value : 17
• i_SRL
Value : 18
• i_SRA
Value : 19
• i_OR
Value : 20
• i_AND
Value : 21
• i_FENCE
Value : 22
• i_BEQ
Value : 23
• i_BNE
Value : 24
• i_BLT
Value : 25
• i_BGE
Value : 26
• i_BLTU
Value : 27
• i_BGEU
Value : 28
• i_SB
Value : 29
• i_SH
Value : 30
• i_SW
Value : 31
• i_LB
Value : 32
• i_LH
Value : 33
• i_LW
Value : 34
• i_LBU
Value : 35
• i_LHU
Value : 36
• i_JAL
Value : 37
• i_JALR
Value : 38
• i_ECALL
Value : 39
• i_EBREAK
Value : 40
• i_MRET
Value : 41
• i_CSRRW
Value : 42
• i_CSRRS
Value : 43
• i_CSRRC
Value : 44
• i_CSRRWI
Value : 45
• i_CSRRSI
Value : 46
• i_CSRRCI
Value : 47
commands 11 values
! @brief Type listings to define the controller outputs feed into the ALU.
• c_ADD
Value : 0
• c_SUB
Value : 1
• c_SLL
Value : 2
• c_SRL
Value : 3
• c_SRA
Value : 4
• c_SLT
Value : 5
• c_SLTU
Value : 6
• c_AND
Value : 7
• c_OR
Value : 8
• c_XOR
Value : 9
• c_NONE
Value : 10
csr_register 17 values
! @brief Type listings to define the names of the different CSR registers names.
• r_MSTATUS
Value : 0
• r_MISA
Value : 1
• r_MIE
Value : 2
• r_MTVEC
Value : 3
• r_MSCRATCH
Value : 4
• r_MEPC
Value : 5
• r_MCAUSE
Value : 6
• r_MTVAL
Value : 7
• r_MIP
Value : 8
• r_CYCLE
Value : 9
• r_CYCLEH
Value : 10
• r_INSTR
Value : 11
• r_INSTRH
Value : 12
• r_MVENDORID
Value : 13
• r_MARCHID
Value : 14
• r_MIMPID
Value : 15
• r_MHARTID
Value : 16
Source¶
Raw source Full file
--------------------------------------------------------------------
--------------------------------------------------------------------
--! @brief Package to define some wirings types to make easier the transfer between modules, by using names rather than obscur std_logic_vector values.
PACKAGE common IS
--! @brief Type listings to define the decoder outputs, per opcodes.
TYPE instructions IS (
i_NOP,
i_LUI, i_AUIPC,
i_ADDI, i_SLTI, i_SLTIU, i_XORI,
i_ANDI, i_SLLI, i_SRLI, i_SRAI,
i_ORI,
i_ADD, i_SUB, i_SLL, i_SLT,
i_SLTU, i_XOR, i_SRL, i_SRA,
i_OR, i_AND,
i_FENCE,
i_BEQ, i_BNE, i_BLT, i_BGE,
i_BLTU, i_BGEU,
i_SB, i_SH, i_SW, i_LB,
i_LH, i_LW, i_LBU, i_LHU,
i_JAL, i_JALR,
i_ECALL, i_EBREAK, i_MRET,
i_CSRRW, i_CSRRS, i_CSRRC, i_CSRRWI,
i_CSRRSI, i_CSRRCI
);
--! @brief Type listings to define the controller outputs feed into the ALU.
TYPE commands IS (
c_ADD, c_SUB,
c_SLL, c_SRL, c_SRA,
c_SLT, c_SLTU,
c_AND, c_OR, c_XOR,
c_NONE
);
--! @brief Type listings to define the names of the different CSR registers names.
TYPE csr_register IS (
r_MSTATUS,
r_MISA,
r_MIE,
r_MTVEC,
r_MSCRATCH,
r_MEPC,
r_MCAUSE,
r_MTVAL,
r_MIP,
r_CYCLE, r_CYCLEH,
r_INSTR, r_INSTRH,
r_MVENDORID,
r_MARCHID,
r_MIMPID,
r_MHARTID
);
END common;
PACKAGE BODY common IS
END common;
Records¶
records¶
records.vhd
records package
Imports¶
Imports 1 element
ieee std_logic_1164
Structures¶
Structure list 1 element
alu_feedback 8 elements
! @brief This records group the status flags out of the ALU, feed into the controller to decide if an exception or a branch must be taken.
- • zero STD_LOGIC
- • overflow STD_LOGIC
- • beq STD_LOGIC
- • bne STD_LOGIC
- • blt STD_LOGIC
- • bge STD_LOGIC
- • bltu STD_LOGIC
- • bgeu STD_LOGIC
Source¶
Raw source Full file
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
PACKAGE records IS
--! @brief This records group the status flags out of the ALU, feed into the controller to decide if an exception or a branch must be taken.
TYPE alu_feedback IS RECORD
zero : STD_LOGIC; --! ALU produced a zero output
overflow : STD_LOGIC; --! ALU overflow (the result is then WRONG)
beq : STD_LOGIC; --! Indicate that the BEQ condition is valid for jump
bne : STD_LOGIC; --! Indicate that the BNE condition is valid for jump
blt : STD_LOGIC; --! Indicate that the BLT condition is valid for jump
bge : STD_LOGIC; --! Indicate that the BGE condition is valid for jump
bltu : STD_LOGIC; --! Indicate that the BLTU condition is valid for jump
bgeu : STD_LOGIC; --! Indicate that the BGEU condition is valid for jump
END RECORD alu_feedback;
END PACKAGE records;