Memories

Same as the VHDL version, we did used IPs to define the memories.

IPs

ram

ram.v

ram module

ALTERA

Ports

Ports list 9 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

aclr

Input

logic

-

Combinatorial

-

Fanout : 0

byteena_a

Input

logic

[3 : 0]

Combinatorial

-

Fanout : 0

clock

Input

logic

-

Combinatorial

-

Fanout : 0

data

Input

logic

[31 : 0]

Combinatorial

-

Fanout : 0

enable

Input

logic

-

Combinatorial

-

Fanout : 0

rdaddress

Input

logic

[14 : 0]

Combinatorial

-

Fanout : 0

wraddress

Input

logic

[14 : 0]

Combinatorial

-

Fanout : 0

wren

Input

logic

-

Combinatorial

-

Fanout : 0

q

Output

logic

[31 : 0]

Combinatorial

-

Fanout : 0

Modules

Modules 1 element

• altsyncram : altsyncram_component ALTERA

Connections :

aclr

⮂

aclr0

wraddress

⮂

address_a

rdaddress

⮂

address_b

byteena_a

⮂

byteena_a

clock

⮂

clock0

enable

⮂

clocken0

data

⮂

data_a

wren

⮂

wren_a

sub_wire0

⮂

q_b

1'b0

⮂

aclr1

1'b0

⮂

addressstall_a

1'b0

⮂

addressstall_b

1'b1

⮂

byteena_b

1'b1

⮂

clock1

1'b1

⮂

clocken1

1'b1

⮂

clocken2

1'b1

⮂

clocken3

{32{1'b1}}

⮂

data_b

eccstatus

q_a

1'b1

⮂

rden_a

1'b1

⮂

rden_b

1'b0

⮂

wren_b

Signals

Signals list 7 elements

Name

Description

Type

Size

Kind

Fanout

aclr

synopsys translate_off

tri0

-

Combinatorial

Fanout : 0

byteena_a

tri1

[3 : 0]

Combinatorial

Fanout : 0

clock

tri1

-

Combinatorial

Fanout : 0

enable

tri1

-

Combinatorial

Fanout : 0

wren

tri0

-

Combinatorial

Fanout : 0

sub_wire0

synopsys translate_on

wire

[31 : 0]

Combinatorial

Fanout : 0

q

wire

[31 : 0]

Combinatorial

Fanout : 0

Instantiation templates

Instantiation templates 2 elements

ram <name> (
    .aclr      (i_aclr),
    .byteena_a (i_byteena_a),
    .clock     (i_clock),
    .data      (i_data),
    .enable    (i_enable),
    .rdaddress (i_rdaddress),
    .wraddress (i_wraddress),
    .wren      (i_wren),
    .q         (i_q)
);
<name>: entity work.ram
   port map (
        aclr       => i_aclr,
        byteena_a  => i_byteena_a,
        clock      => i_clock,
        data       => i_data,
        enable     => i_enable,
        rdaddress  => i_rdaddress,
        wraddress  => i_wraddress,
        wren       => i_wren,
        q          => i_q
    );

Source

Raw source Full file

// megafunction wizard: %RAM: 2-PORT%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altsyncram 

// ============================================================
// File Name: ram.v
// Megafunction Name(s):
//          altsyncram
//
// Simulation Library Files(s):
//          altera_mf
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 24.1std.0 Build 1077 03/04/2025 SC Lite Edition
// ************************************************************


//Copyright (C) 2025  Altera Corporation. All rights reserved.
//Your use of Altera Corporation's design tools, logic functions 
//and other software and tools, and any partner logic 
//functions, and any output files from any of the foregoing 
//(including device programming or simulation files), and any 
//associated documentation or information are expressly subject 
//to the terms and conditions of the Altera Program License 
//Subscription Agreement, the Altera Quartus Prime License Agreement,
//the Altera IP License Agreement, or other applicable license
//agreement, including, without limitation, that your use is for
//the sole purpose of programming logic devices manufactured by
//Altera and sold by Altera or its authorized distributors.  Please
//refer to the Altera Software License Subscription Agreements 
//on the Quartus Prime software download page.


// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module ram (
    aclr,
    byteena_a,
    clock,
    data,
    enable,
    rdaddress,
    wraddress,
    wren,
    q);

    input     aclr;
    input   [3:0]  byteena_a;
    input     clock;
    input   [31:0]  data;
    input     enable;
    input   [14:0]  rdaddress;
    input   [14:0]  wraddress;
    input     wren;
    output  [31:0]  q;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
    tri0      aclr;
    tri1    [3:0]  byteena_a;
    tri1      clock;
    tri1      enable;
    tri0      wren;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif

    wire [31:0] sub_wire0;
    wire [31:0] q = sub_wire0[31:0];

    altsyncram  altsyncram_component (
                .aclr0 (aclr),
                .address_a (wraddress),
                .address_b (rdaddress),
                .byteena_a (byteena_a),
                .clock0 (clock),
                .clocken0 (enable),
                .data_a (data),
                .wren_a (wren),
                .q_b (sub_wire0),
                .aclr1 (1'b0),
                .addressstall_a (1'b0),
                .addressstall_b (1'b0),
                .byteena_b (1'b1),
                .clock1 (1'b1),
                .clocken1 (1'b1),
                .clocken2 (1'b1),
                .clocken3 (1'b1),
                .data_b ({32{1'b1}}),
                .eccstatus (),
                .q_a (),
                .rden_a (1'b1),
                .rden_b (1'b1),
                .wren_b (1'b0));
    defparam
        altsyncram_component.address_aclr_b = "CLEAR0",
        altsyncram_component.address_reg_b = "CLOCK0",
        altsyncram_component.byte_size = 8,
        altsyncram_component.clock_enable_input_a = "NORMAL",
        altsyncram_component.clock_enable_input_b = "NORMAL",
        altsyncram_component.clock_enable_output_b = "NORMAL",
        altsyncram_component.init_file = "build/ram.mif",
        altsyncram_component.intended_device_family = "MAX 10",
        altsyncram_component.lpm_type = "altsyncram",
        altsyncram_component.numwords_a = 24576,
        altsyncram_component.numwords_b = 24576,
        altsyncram_component.operation_mode = "DUAL_PORT",
        altsyncram_component.outdata_aclr_b = "CLEAR0",
        altsyncram_component.outdata_reg_b = "CLOCK0",
        altsyncram_component.power_up_uninitialized = "FALSE",
        altsyncram_component.read_during_write_mode_mixed_ports = "DONT_CARE",
        altsyncram_component.widthad_a = 15,
        altsyncram_component.widthad_b = 15,
        altsyncram_component.width_a = 32,
        altsyncram_component.width_b = 32,
        altsyncram_component.width_byteena_a = 4;


endmodule

// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0"
// Retrieval info: PRIVATE: ADDRESSSTALL_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTEENA_ACLR_A NUMERIC "0"
// Retrieval info: PRIVATE: BYTEENA_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_ENABLE_A NUMERIC "1"
// Retrieval info: PRIVATE: BYTE_ENABLE_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8"
// Retrieval info: PRIVATE: BlankMemory NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_B NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_B NUMERIC "1"
// Retrieval info: PRIVATE: CLRdata NUMERIC "0"
// Retrieval info: PRIVATE: CLRq NUMERIC "1"
// Retrieval info: PRIVATE: CLRrdaddress NUMERIC "1"
// Retrieval info: PRIVATE: CLRrren NUMERIC "0"
// Retrieval info: PRIVATE: CLRwraddress NUMERIC "0"
// Retrieval info: PRIVATE: CLRwren NUMERIC "0"
// Retrieval info: PRIVATE: Clock NUMERIC "0"
// Retrieval info: PRIVATE: Clock_A NUMERIC "0"
// Retrieval info: PRIVATE: Clock_B NUMERIC "0"
// Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0"
// Retrieval info: PRIVATE: INDATA_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: INDATA_REG_B NUMERIC "0"
// Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_B"
// Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0"
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "MAX 10"
// Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0"
// Retrieval info: PRIVATE: JTAG_ID STRING "NONE"
// Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0"
// Retrieval info: PRIVATE: MEMSIZE NUMERIC "1572864"
// Retrieval info: PRIVATE: MEM_IN_BITS NUMERIC "0"
// Retrieval info: PRIVATE: MIFfilename STRING "mem.mif"
// Retrieval info: PRIVATE: OPERATION_MODE NUMERIC "2"
// Retrieval info: PRIVATE: OUTDATA_ACLR_B NUMERIC "1"
// Retrieval info: PRIVATE: OUTDATA_REG_B NUMERIC "1"
// Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_MIXED_PORTS NUMERIC "2"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "3"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_B NUMERIC "3"
// Retrieval info: PRIVATE: REGdata NUMERIC "1"
// Retrieval info: PRIVATE: REGq NUMERIC "1"
// Retrieval info: PRIVATE: REGrdaddress NUMERIC "1"
// Retrieval info: PRIVATE: REGrren NUMERIC "1"
// Retrieval info: PRIVATE: REGwraddress NUMERIC "1"
// Retrieval info: PRIVATE: REGwren NUMERIC "1"
// Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
// Retrieval info: PRIVATE: USE_DIFF_CLKEN NUMERIC "0"
// Retrieval info: PRIVATE: UseDPRAM NUMERIC "1"
// Retrieval info: PRIVATE: VarWidth NUMERIC "0"
// Retrieval info: PRIVATE: WIDTH_READ_A NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_READ_B NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_WRITE_A NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_WRITE_B NUMERIC "32"
// Retrieval info: PRIVATE: WRADDR_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: WRADDR_REG_B NUMERIC "0"
// Retrieval info: PRIVATE: WRCTRL_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: enable NUMERIC "1"
// Retrieval info: PRIVATE: rden NUMERIC "0"
// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
// Retrieval info: CONSTANT: ADDRESS_ACLR_B STRING "CLEAR0"
// Retrieval info: CONSTANT: ADDRESS_REG_B STRING "CLOCK0"
// Retrieval info: CONSTANT: BYTE_SIZE NUMERIC "8"
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "NORMAL"
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_B STRING "NORMAL"
// Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_B STRING "NORMAL"
// Retrieval info: CONSTANT: INIT_FILE STRING "mem.mif"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "MAX 10"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram"
// Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "49152"
// Retrieval info: CONSTANT: NUMWORDS_B NUMERIC "49152"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "DUAL_PORT"
// Retrieval info: CONSTANT: OUTDATA_ACLR_B STRING "CLEAR0"
// Retrieval info: CONSTANT: OUTDATA_REG_B STRING "CLOCK0"
// Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE"
// Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_MIXED_PORTS STRING "DONT_CARE"
// Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "16"
// Retrieval info: CONSTANT: WIDTHAD_B NUMERIC "16"
// Retrieval info: CONSTANT: WIDTH_A NUMERIC "32"
// Retrieval info: CONSTANT: WIDTH_B NUMERIC "32"
// Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "4"
// Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT GND "aclr"
// Retrieval info: USED_PORT: byteena_a 0 0 4 0 INPUT VCC "byteena_a[3..0]"
// Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC "clock"
// Retrieval info: USED_PORT: data 0 0 32 0 INPUT NODEFVAL "data[31..0]"
// Retrieval info: USED_PORT: enable 0 0 0 0 INPUT VCC "enable"
// Retrieval info: USED_PORT: q 0 0 32 0 OUTPUT NODEFVAL "q[31..0]"
// Retrieval info: USED_PORT: rdaddress 0 0 16 0 INPUT NODEFVAL "rdaddress[15..0]"
// Retrieval info: USED_PORT: wraddress 0 0 16 0 INPUT NODEFVAL "wraddress[15..0]"
// Retrieval info: USED_PORT: wren 0 0 0 0 INPUT GND "wren"
// Retrieval info: CONNECT: @aclr0 0 0 0 0 aclr 0 0 0 0
// Retrieval info: CONNECT: @address_a 0 0 16 0 wraddress 0 0 16 0
// Retrieval info: CONNECT: @address_b 0 0 16 0 rdaddress 0 0 16 0
// Retrieval info: CONNECT: @byteena_a 0 0 4 0 byteena_a 0 0 4 0
// Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0
// Retrieval info: CONNECT: @clocken0 0 0 0 0 enable 0 0 0 0
// Retrieval info: CONNECT: @data_a 0 0 32 0 data 0 0 32 0
// Retrieval info: CONNECT: @wren_a 0 0 0 0 wren 0 0 0 0
// Retrieval info: CONNECT: q 0 0 32 0 @q_b 0 0 32 0
// Retrieval info: GEN_FILE: TYPE_NORMAL ram.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram.bsf FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_inst.v FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_bb.v TRUE
// Retrieval info: LIB_FILE: altera_mf

rom

rom.v

rom module

ALTERA

Ports

Ports list 9 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

aclr

Input

logic

-

Combinatorial

-

Fanout : 0

clock

Input

logic

-

Combinatorial

-

Fanout : 0

enable

Input

logic

-

Combinatorial

-

Fanout : 0

address 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

address_a

Input

logic

[15 : 0]

Combinatorial

-

Fanout : 0

address_b

Input

logic

[15 : 0]

Combinatorial

Negative

Fanout : 0

rden 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

rden_a

Input

logic

-

Combinatorial

-

Fanout : 0

rden_b

Input

logic

-

Combinatorial

Negative

Fanout : 0

q 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

q_a

Output

logic

[31 : 0]

Combinatorial

-

Fanout : 0

q_b

Output

logic

[31 : 0]

Combinatorial

Negative

Fanout : 0

Modules

Modules 1 element

• altsyncram : altsyncram_component ALTERA

Connections :

aclr

⮂

aclr0

address_a

⮂

address_a

address_b

⮂

address_b

clock

⮂

clock0

enable

⮂

clocken0

sub_wire0

⮂

data_a

sub_wire0

⮂

data_b

rden_a

⮂

rden_a

rden_b

⮂

rden_b

sub_wire1

⮂

wren_a

sub_wire1

⮂

wren_b

sub_wire2

⮂

q_a

sub_wire3

⮂

q_b

aclr1

addressstall_a

addressstall_b

byteena_a

byteena_b

clock1

clocken1

clocken2

clocken3

eccstatus

Signals

Signals list 11 elements

Name

Description

Type

Size

Kind

Fanout

aclr

synopsys translate_off

tri0

-

Combinatorial

Fanout : 0

clock

tri1

-

Combinatorial

Fanout : 0

enable

tri1

-

Combinatorial

Fanout : 0

rden 2 elements

Name

Description

Type

Size

Kind

Fanout

rden_a

tri1

-

Combinatorial

Fanout : 0

rden_b

tri1

-

Combinatorial

Fanout : 0

sub 4 elements

Name

Description

Type

Size

Kind

Fanout

sub_wire0

synopsys translate_on

wire

[31 : 0]

Combinatorial

Fanout : 0

sub_wire1

wire

-

Combinatorial

Fanout : 0

sub_wire2

wire

[31 : 0]

Combinatorial

Fanout : 0

sub_wire3

wire

[31 : 0]

Combinatorial

Fanout : 0

q 2 elements

Name

Description

Type

Size

Kind

Fanout

q_a

wire

[31 : 0]

Combinatorial

Fanout : 0

q_b

wire

[31 : 0]

Combinatorial

Fanout : 0

Instantiation templates

Instantiation templates 2 elements

rom <name> (
    .aclr      (i_aclr),
    .address_a (i_address_a),
    .address_b (i_address_b),
    .clock     (i_clock),
    .enable    (i_enable),
    .rden_a    (i_rden_a),
    .rden_b    (i_rden_b),
    .q_a       (i_q_a),
    .q_b       (i_q_b)
);
<name>: entity work.rom
   port map (
        aclr       => i_aclr,
        address_a  => i_address_a,
        address_b  => i_address_b,
        clock      => i_clock,
        enable     => i_enable,
        rden_a     => i_rden_a,
        rden_b     => i_rden_b,
        q_a        => i_q_a,
        q_b        => i_q_b
    );

Source

Raw source Full file

// megafunction wizard: %ROM: 2-PORT%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altsyncram 

// ============================================================
// File Name: rom.v
// Megafunction Name(s):
// 			altsyncram
//
// Simulation Library Files(s):
// 			altera_mf
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 24.1std.0 Build 1077 03/04/2025 SC Lite Edition
// ************************************************************


//Copyright (C) 2025  Altera Corporation. All rights reserved.
//Your use of Altera Corporation's design tools, logic functions 
//and other software and tools, and any partner logic 
//functions, and any output files from any of the foregoing 
//(including device programming or simulation files), and any 
//associated documentation or information are expressly subject 
//to the terms and conditions of the Altera Program License 
//Subscription Agreement, the Altera Quartus Prime License Agreement,
//the Altera IP License Agreement, or other applicable license
//agreement, including, without limitation, that your use is for
//the sole purpose of programming logic devices manufactured by
//Altera and sold by Altera or its authorized distributors.  Please
//refer to the Altera Software License Subscription Agreements 
//on the Quartus Prime software download page.


// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module rom (
	aclr,
	address_a,
	address_b,
	clock,
	enable,
	rden_a,
	rden_b,
	q_a,
	q_b);

	input	  aclr;
	input	[15:0]  address_a;
	input	[15:0]  address_b;
	input	  clock;
	input	  enable;
	input	  rden_a;
	input	  rden_b;
	output	[31:0]  q_a;
	output	[31:0]  q_b;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
	tri0	  aclr;
	tri1	  clock;
	tri1	  enable;
	tri1	  rden_a;
	tri1	  rden_b;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif

	wire [31:0] sub_wire0 = 32'h0;
	wire  sub_wire1 = 1'h0;
	wire [31:0] sub_wire2;
	wire [31:0] sub_wire3;
	wire [31:0] q_a = sub_wire2[31:0];
	wire [31:0] q_b = sub_wire3[31:0];

	altsyncram	altsyncram_component (
				.aclr0 (aclr),
				.address_a (address_a),
				.address_b (address_b),
				.clock0 (clock),
				.clocken0 (enable),
				.data_a (sub_wire0),
				.data_b (sub_wire0),
				.rden_a (rden_a),
				.rden_b (rden_b),
				.wren_a (sub_wire1),
				.wren_b (sub_wire1),
				.q_a (sub_wire2),
				.q_b (sub_wire3)
				// synopsys translate_off
				,
				.aclr1 (),
				.addressstall_a (),
				.addressstall_b (),
				.byteena_a (),
				.byteena_b (),
				.clock1 (),
				.clocken1 (),
				.clocken2 (),
				.clocken3 (),
				.eccstatus ()
				// synopsys translate_on
				);
	defparam
		altsyncram_component.address_reg_b = "CLOCK0",
		altsyncram_component.clock_enable_input_a = "NORMAL",
		altsyncram_component.clock_enable_input_b = "NORMAL",
		altsyncram_component.clock_enable_output_a = "NORMAL",
		altsyncram_component.clock_enable_output_b = "NORMAL",
		altsyncram_component.indata_reg_b = "CLOCK0",
		altsyncram_component.init_file = "build/rom.mif",
		altsyncram_component.intended_device_family = "MAX 10",
		altsyncram_component.lpm_type = "altsyncram",
		altsyncram_component.numwords_a = 49152,
		altsyncram_component.numwords_b = 49152,
		altsyncram_component.operation_mode = "BIDIR_DUAL_PORT",
		altsyncram_component.outdata_aclr_a = "CLEAR0",
		altsyncram_component.outdata_aclr_b = "CLEAR0",
		altsyncram_component.outdata_reg_a = "CLOCK0",
		altsyncram_component.outdata_reg_b = "CLOCK0",
		altsyncram_component.power_up_uninitialized = "FALSE",
		altsyncram_component.widthad_a = 16,
		altsyncram_component.widthad_b = 16,
		altsyncram_component.width_a = 32,
		altsyncram_component.width_b = 32,
		altsyncram_component.width_byteena_a = 1,
		altsyncram_component.width_byteena_b = 1,
		altsyncram_component.wrcontrol_wraddress_reg_b = "CLOCK0";


endmodule

// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0"
// Retrieval info: PRIVATE: ADDRESSSTALL_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTEENA_ACLR_A NUMERIC "0"
// Retrieval info: PRIVATE: BYTEENA_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_ENABLE_A NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_ENABLE_B NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "1"
// Retrieval info: PRIVATE: BlankMemory NUMERIC "0"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_B NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_B NUMERIC "1"
// Retrieval info: PRIVATE: CLRdata NUMERIC "0"
// Retrieval info: PRIVATE: CLRq NUMERIC "1"
// Retrieval info: PRIVATE: CLRrdaddress NUMERIC "0"
// Retrieval info: PRIVATE: CLRrren NUMERIC "0"
// Retrieval info: PRIVATE: CLRwraddress NUMERIC "0"
// Retrieval info: PRIVATE: CLRwren NUMERIC "0"
// Retrieval info: PRIVATE: Clock NUMERIC "0"
// Retrieval info: PRIVATE: Clock_A NUMERIC "0"
// Retrieval info: PRIVATE: Clock_B NUMERIC "0"
// Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0"
// Retrieval info: PRIVATE: INDATA_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: INDATA_REG_B NUMERIC "1"
// Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A"
// Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0"
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "MAX 10"
// Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0"
// Retrieval info: PRIVATE: JTAG_ID STRING "NONE"
// Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0"
// Retrieval info: PRIVATE: MEMSIZE NUMERIC "1572864"
// Retrieval info: PRIVATE: MEM_IN_BITS NUMERIC "0"
// Retrieval info: PRIVATE: MIFfilename STRING "mem.mif"
// Retrieval info: PRIVATE: OPERATION_MODE NUMERIC "3"
// Retrieval info: PRIVATE: OUTDATA_ACLR_B NUMERIC "1"
// Retrieval info: PRIVATE: OUTDATA_REG_B NUMERIC "1"
// Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_MIXED_PORTS NUMERIC "2"
// Retrieval info: PRIVATE: REGdata NUMERIC "1"
// Retrieval info: PRIVATE: REGq NUMERIC "1"
// Retrieval info: PRIVATE: REGrdaddress NUMERIC "0"
// Retrieval info: PRIVATE: REGrren NUMERIC "1"
// Retrieval info: PRIVATE: REGwraddress NUMERIC "1"
// Retrieval info: PRIVATE: REGwren NUMERIC "1"
// Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
// Retrieval info: PRIVATE: USE_DIFF_CLKEN NUMERIC "0"
// Retrieval info: PRIVATE: UseDPRAM NUMERIC "1"
// Retrieval info: PRIVATE: VarWidth NUMERIC "0"
// Retrieval info: PRIVATE: WIDTH_READ_A NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_READ_B NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_WRITE_A NUMERIC "32"
// Retrieval info: PRIVATE: WIDTH_WRITE_B NUMERIC "32"
// Retrieval info: PRIVATE: WRADDR_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: WRADDR_REG_B NUMERIC "1"
// Retrieval info: PRIVATE: WRCTRL_ACLR_B NUMERIC "0"
// Retrieval info: PRIVATE: enable NUMERIC "1"
// Retrieval info: PRIVATE: rden NUMERIC "1"
// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
// Retrieval info: CONSTANT: ADDRESS_REG_B STRING "CLOCK0"
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "NORMAL"
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_B STRING "NORMAL"
// Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "NORMAL"
// Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_B STRING "NORMAL"
// Retrieval info: CONSTANT: INDATA_REG_B STRING "CLOCK0"
// Retrieval info: CONSTANT: INIT_FILE STRING "mem.mif"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "MAX 10"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram"
// Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "49152"
// Retrieval info: CONSTANT: NUMWORDS_B NUMERIC "49152"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "BIDIR_DUAL_PORT"
// Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "CLEAR0"
// Retrieval info: CONSTANT: OUTDATA_ACLR_B STRING "CLEAR0"
// Retrieval info: CONSTANT: OUTDATA_REG_A STRING "CLOCK0"
// Retrieval info: CONSTANT: OUTDATA_REG_B STRING "CLOCK0"
// Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE"
// Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "16"
// Retrieval info: CONSTANT: WIDTHAD_B NUMERIC "16"
// Retrieval info: CONSTANT: WIDTH_A NUMERIC "32"
// Retrieval info: CONSTANT: WIDTH_B NUMERIC "32"
// Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1"
// Retrieval info: CONSTANT: WIDTH_BYTEENA_B NUMERIC "1"
// Retrieval info: CONSTANT: WRCONTROL_WRADDRESS_REG_B STRING "CLOCK0"
// Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT GND "aclr"
// Retrieval info: USED_PORT: address_a 0 0 16 0 INPUT NODEFVAL "address_a[15..0]"
// Retrieval info: USED_PORT: address_b 0 0 16 0 INPUT NODEFVAL "address_b[15..0]"
// Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC "clock"
// Retrieval info: USED_PORT: enable 0 0 0 0 INPUT VCC "enable"
// Retrieval info: USED_PORT: q_a 0 0 32 0 OUTPUT NODEFVAL "q_a[31..0]"
// Retrieval info: USED_PORT: q_b 0 0 32 0 OUTPUT NODEFVAL "q_b[31..0]"
// Retrieval info: USED_PORT: rden_a 0 0 0 0 INPUT VCC "rden_a"
// Retrieval info: USED_PORT: rden_b 0 0 0 0 INPUT VCC "rden_b"
// Retrieval info: CONNECT: @aclr0 0 0 0 0 aclr 0 0 0 0
// Retrieval info: CONNECT: @address_a 0 0 16 0 address_a 0 0 16 0
// Retrieval info: CONNECT: @address_b 0 0 16 0 address_b 0 0 16 0
// Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0
// Retrieval info: CONNECT: @clocken0 0 0 0 0 enable 0 0 0 0
// Retrieval info: CONNECT: @data_a 0 0 32 0 GND 0 0 32 0
// Retrieval info: CONNECT: @data_b 0 0 32 0 GND 0 0 32 0
// Retrieval info: CONNECT: @rden_a 0 0 0 0 rden_a 0 0 0 0
// Retrieval info: CONNECT: @rden_b 0 0 0 0 rden_b 0 0 0 0
// Retrieval info: CONNECT: @wren_a 0 0 0 0 GND 0 0 0 0
// Retrieval info: CONNECT: @wren_b 0 0 0 0 GND 0 0 0 0
// Retrieval info: CONNECT: q_a 0 0 32 0 @q_a 0 0 32 0
// Retrieval info: CONNECT: q_b 0 0 32 0 @q_b 0 0 32 0
// Retrieval info: GEN_FILE: TYPE_NORMAL rom.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom.bsf FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_inst.v FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL rom_bb.v TRUE
// Retrieval info: LIB_FILE: altera_mf

Assemblies

mem_manager

mem_manager.sv

mem_manager module

Imports

Imports 1 element

  • core_config_pkg XLEN

Parameters

Parameters 2 elements

• ADDR_BITS Type : logic Default : 16

How many address bits to pass through

• ID_BITS Type : logic Default : 16'hFFFF

-

Ports

Ports list 20 elements

data 4 elements

in 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

data_in_a

Input

Port A signals (read/write port)

logic

[(XLEN - 1) : 0]

Combinatorial

-

Fanout : 0

data_in_b

Input

Port B signals (typically read-only for instruction fetch)

logic

[(XLEN - 1) : 0]

Combinatorial

Negative

Fanout : 0

out 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

data_out_a

Output

logic

[(XLEN - 1) : 0]

Combinatorial

-

Fanout : 0

data_out_b

Output

logic

[(XLEN - 1) : 0]

Combinatorial

Negative

Fanout : 0

byteen 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

byteen_in_a

Input

logic

[((XLEN / 4) - 1) : 0]

Combinatorial

-

Fanout : 0

byteen_out_a

Output

logic

[((XLEN / 4) - 1) : 0]

Combinatorial

-

Fanout : 0

addr 4 elements

in 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

addr_in_a

Input

logic

[(XLEN - 1) : 0]

Combinatorial

-

Fanout : 0

addr_in_b

Input

logic

[(XLEN - 1) : 0]

Combinatorial

Negative

Fanout : 0

out 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

addr_out_a

Output

logic

[(ADDR_BITS - 1) : 0]

Combinatorial

-

Fanout : 0

addr_out_b

Output

logic

[(ADDR_BITS - 1) : 0]

Combinatorial

Negative

Fanout : 0

aclr 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

aclr_in_a

Input

logic

-

Combinatorial

-

Fanout : 0

aclr_out_a

Output

logic

-

Combinatorial

-

Fanout : 0

enable 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

enable_in_a

Input

logic

-

Combinatorial

-

Fanout : 0

enable_out_a

Output

logic

-

Combinatorial

-

Fanout : 0

rden 4 elements

in 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

rden_in_a

Input

logic

-

Combinatorial

-

Fanout : 0

rden_in_b

Input

logic

-

Combinatorial

Negative

Fanout : 0

out 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

rden_out_a

Output

logic

-

Combinatorial

-

Fanout : 0

rden_out_b

Output

logic

-

Combinatorial

Negative

Fanout : 0

wren 2 elements

Name

Direction

Description

Type

Size

Kind

Polarity

Fanout

wren_in_a

Input

logic

-

Combinatorial

-

Fanout : 0

wren_out_a

Output

logic

-

Combinatorial

-

Fanout : 0

Signals

Signals list 2 elements

select 2 elements

Name

Description

Type

Size

Kind

Fanout

select_a

Internal enable signals for port A and B

logic

-

Combinatorial

Fanout : 0

select_b

logic

-

Combinatorial

Fanout : 0

Instantiation templates

Instantiation templates 2 elements

mem_manager <name> #(
    .ADDR_BITS (16),
    .ID_BITS   (16'hFFFF)

)(
    .data_in_a    (i_data_in_a),
    .data_out_a   (i_data_out_a),
    .byteen_in_a  (i_byteen_in_a),
    .byteen_out_a (i_byteen_out_a),
    .addr_in_a    (i_addr_in_a),
    .addr_out_a   (i_addr_out_a),
    .aclr_in_a    (i_aclr_in_a),
    .aclr_out_a   (i_aclr_out_a),
    .enable_in_a  (i_enable_in_a),
    .enable_out_a (i_enable_out_a),
    .rden_in_a    (i_rden_in_a),
    .rden_out_a   (i_rden_out_a),
    .wren_in_a    (i_wren_in_a),
    .wren_out_a   (i_wren_out_a),
    .data_in_b    (i_data_in_b),
    .data_out_b   (i_data_out_b),
    .addr_in_b    (i_addr_in_b),
    .addr_out_b   (i_addr_out_b),
    .rden_in_b    (i_rden_in_b),
    .rden_out_b   (i_rden_out_b)
);
<name>: entity work.mem_manager
    generic map (
        ADDR_BITS  => 16,
        ID_BITS    => 16'hFFFF
    )
   port map (
        data_in_a     => i_data_in_a,
        data_out_a    => i_data_out_a,
        byteen_in_a   => i_byteen_in_a,
        byteen_out_a  => i_byteen_out_a,
        addr_in_a     => i_addr_in_a,
        addr_out_a    => i_addr_out_a,
        aclr_in_a     => i_aclr_in_a,
        aclr_out_a    => i_aclr_out_a,
        enable_in_a   => i_enable_in_a,
        enable_out_a  => i_enable_out_a,
        rden_in_a     => i_rden_in_a,
        rden_out_a    => i_rden_out_a,
        wren_in_a     => i_wren_in_a,
        wren_out_a    => i_wren_out_a,
        data_in_b     => i_data_in_b,
        data_out_b    => i_data_out_b,
        addr_in_b     => i_addr_in_b,
        addr_out_b    => i_addr_out_b,
        rden_in_b     => i_rden_in_b,
        rden_out_b    => i_rden_out_b
    );

Source

Raw source Full file

/*
 *  File :      rtl/memory/assemblies/utils/mem_manager.sv
 *
 *  Author :    l.heywang <leonard.heywang@proton.me>
 *  Date :      16/11/2025
 *  
 *  Brief :     This file define the memory manager, a block that trigger only if 
 *              the address match a specific pattern. Does also provide an
 *              isolator to the write bus in the disabled state.             
 */

`timescale 1ns / 1ps

import core_config_pkg::XLEN;

module mem_manager #(
    parameter int ADDR_BITS = 16,  // How many address bits to pass through
    parameter logic [(XLEN - ADDR_BITS - 1):0] ID_BITS = 16'hFFFF  // Address match pattern for upper bits
) (
    // Port A signals (read/write port)
    input logic [(XLEN - 1):0] data_in_a,
    output logic [(XLEN - 1):0] data_out_a,
    input logic [((XLEN / 4) - 1):0] byteen_in_a,
    output logic [((XLEN / 4) - 1):0] byteen_out_a,
    input logic [(XLEN - 1):0] addr_in_a,
    output logic [(ADDR_BITS - 1):0] addr_out_a,
    input logic aclr_in_a,
    output logic aclr_out_a,
    input logic enable_in_a,
    output logic enable_out_a,
    input logic rden_in_a,
    output logic rden_out_a,
    input logic wren_in_a,
    output logic wren_out_a,

    // Port B signals (typically read-only for instruction fetch)
    input logic [(XLEN - 1):0] data_in_b,
    output logic [(XLEN - 1):0] data_out_b,
    input logic [(XLEN - 1):0] addr_in_b,
    output logic [(ADDR_BITS - 1):0] addr_out_b,
    input logic rden_in_b,
    output logic rden_out_b
);

    // Internal enable signals for port A and B
    logic select_a;
    logic select_b;

    // Address decode logic - check if upper address bits match ID_BITS
    assign select_a = (addr_in_a[(XLEN-1):(ADDR_BITS)] == ID_BITS) && enable_in_a;
    assign select_b = (addr_in_b[(XLEN-1):(ADDR_BITS)] == ID_BITS);

    // Port A outputs - pass through lower address bits
    assign addr_out_a = addr_in_a[(ADDR_BITS-1):0];

    // Port A control signals - only enable when address matches
    assign enable_out_a = select_a;
    assign rden_out_a = select_a && rden_in_a;
    assign wren_out_a = select_a && wren_in_a;
    assign aclr_out_a = aclr_in_a;  // Pass through reset

    // Port A byte enables - only pass through when selected
    assign byteen_out_a = select_a ? byteen_in_a : '0;

    // Port A data - pass through write data, gate read data
    assign data_out_a = select_a ? data_in_a : '0;  // For OR-tree: output zeros when not selected

    // Port B outputs
    assign addr_out_b = addr_in_b[(ADDR_BITS-1):0];
    assign rden_out_b = select_b && rden_in_b;

    // Port B data - gate read data for OR-tree
    assign data_out_b = select_b ? data_in_b : '0;

endmodule